Radio Design Labs DS-RT2

DS-RT2 Remote Control Selector

The front panel of the DS-RT2 features two pushbuttons with two associated LEDs. Upon initial power-up the OFF mode is selected. Touching the other button de-selects OFF and immediately selects ON. An LED adjacent to each button shows which mode is selected.

In a typical installation the DS-RT2 may be used to turn an audio or video source on or off. To turn on an audio source the DS-RT2 may be connected to an RDL ST-SSR1 or ST-RX2 Solid-State Audio Switch. For video switching an RDL TX-MVX may be used. In each of the above examples only one output terminal is needed for triggering therefore a single shielded pair (3-conductor cable) is required for remote connection. For more complex switching networks both outputs (ON and OFF) may be used. In an audio or video control installation the DS-RT2 may be mounted adjacent to an RDL remote volume control such as the D-RLC2 D-RLC3 or RLC10K.

• Remote Selection of ON or OFF
• Single-Button Selection for Each Function
• Open-collector Switching
• 3-wire or 4-wire Remote Wiring
• Professional Aesthetic Appearance
• Companion to other RDL? Remote Controls
• LED Indication